MSD MANUFACTURING CO.,LTD.

Wide Section Ball Bearings (62000, 63000)

Timken’s deep groove ball bearings deliver reliable performance in a wide range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality.
Ball bearings are used widely in instruments and machines in order to minimize friction and power loss. While the concept of the ball bearing dates back at least to Leonardo da Vinci, their design and manufacture has become remarkably sophisticated.
Commercially available ball bearings, which are usually made from hardened steel, involve many forms of construction.There are several types of ball bearings that fit specific needs. The deep-groove ball bearing, is the most versatile. Radial loads and thrust-load capacities may be approximately equal in this bearing. When it has the proper separator, it is very good for high-speed operation. At low speeds, no bearing separator is required; at intermediate speeds, a ball control separator of steel-ribbon construction is adequate; while the ultimate high-speed performance is obtained with a race controlled (or piloted), fully machined separator.

timken 62305-2RS-C3 Wide Section Ball Bearings (62000, 63000)
320,000 mm
150x320x123.825
25 mm x 52 mm x 18 mm timken 62205-2RS-C3 Wide Section Ball Bearings (62000, 63000)
Steel
Separable Inner Ring
20 mm x 47 mm x 18 mm timken 62204-2RS-C3 Wide Section Ball Bearings (62000, 63000)
Triple Lip with Flin
Standard Duty
timken 62203-2RS-C3 Wide Section Ball Bearings (62000, 63000)
55
55x90x18
timken 63003-2RS-C3 Wide Section Ball Bearings (62000, 63000)
240 N
23
timken 63002-2RS-C3 Wide Section Ball Bearings (62000, 63000)
4549557034978
Not Applicable
17 mm x 47 mm x 19 mm timken 62303-2RS-C3 Wide Section Ball Bearings (62000, 63000)
4,773,000
5.000
15 mm x 35 mm x 14 mm timken 62202-2RS-C3 Wide Section Ball Bearings (62000, 63000)
Male Threaded
Zinc-Plated Steel
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Thrust Ball Bearings, Double Direction, Super-Precision
Solid Block/Spherical Roller Bearing Housed Units-Eccentric Piloted Flange Cartridge
Spherical Roller Thrust Bearings
Super-Precision Cylindrical Roller Bearings
Support Rollers With Flange Rings With An Inner Ring
Tapered Roller Bearings/TS (Tapered Single) Imperial
Thrust Cylindrical Roller Bearings-Thrust Washer
Thrust Needle Roller Bearings-Thrust Washer
Thrust Spherical Roller Bearings-Type TSR
Track Rollers,Cam Followers
Type E Tapered Roller Bearing Housed Units-Piloted Bearing
Type E Tapered Roller Bearing Housed Units-Take Up: Top Angle Bearing (E-TTU)
Type E Tapered Roller Bearing Housed Units-Take Up: Wide Slot Bearing
Wide Section Ball Bearings (62000, 63000)
Timken 09196 Bearing
6207 Bearing Timken
Timken 30203 Bearing
469 Bearing