MSD MANUFACTURING CO.,LTD.

Support Rollers With Flange Rings With An Inner Ring

Support Rollers without flange rings are designed for applications where associated components limit axial movement of the outer ring. Based on needle roller bearings, these support rollers are available with or without an inner ring. Support rollers with an inner ring have an inner ring that is slightly wider than the outer ring to avoid axial clamping of the outer ring. Support rollers without an inner ring are intended for arrangements where the pin or shaft is hardened and ground.

Support rollers (yoke-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.. They are based on needle or cylindrical roller bearings. SKF supplies them ready-to-mount. They are available in several designs and variants:

30 mm x 62 mm x 29 mm skf NATR 30 PPXA Support rollers with flange rings with an inner ring: d : 140 mm; D1 : 180 mm

20 mm x 47 mm x 25 mm skf NATV 20 Support rollers with flange rings with an inner ring: D : 17 mm; B : 6 mm

35 mm x 80 mm x 29 mm skf NUTR 3580 A Support rollers with flange rings with an inner ring: C : 43 mm; Bore Diameter (mm) : 55

25 mm x 52 mm x 25 mm skf NATV 25 Support rollers with flange rings with an inner ring: da min. : 1224 mm; (Grease) Lubrication Speed : 85 r/min

60 mm x 150 mm x 75 mm skf NNTR 60x150x75.2ZL Support rollers with flange rings with an inner ring: mass : 14.2; r min. : 0,3 mm

40 mm x 80 mm x 32 mm skf NATV 40 PPA Support rollers with flange rings with an inner ring: Brand : FAG; r1 min : 2,1 mm

40 mm x 80 mm x 32 mm skf NATR 40 PPA Support rollers with flange rings with an inner ring: D : 45 mm; B : 16,637 mm

30 mm x 62 mm x 29 mm skf NUTR 30 A Support rollers with flange rings with an inner ring: Designation SKF : VKBA 3426; Designation SX : CX222

110 mm x 260 mm x 115 mm skf NNTR 110x260x115.2ZL Support rollers with flange rings with an inner ring: Fatigue load limit Pu : 0.325 kN; D3 : 58 mm

20 mm x 52 mm x 25 mm skf PWTR 2052.2RS Support rollers with flange rings with an inner ring: Bearing number : 7208AC; Outer Diameter (mm) : 80

40 mm x 90 mm x 32 mm skf NUTR 4090 A Support rollers with flange rings with an inner ring: Brand : ISO; Width (mm) : 167

5 mm x 16 mm x 12 mm skf NATR 5 X Support rollers with flange rings with an inner ring: B2 ≈ : 355 mm; D1 ≈ : 649 mm

◂ Previous page Next page ▸

All Products Contact Now

Product Categories: Angular Contact Thrust Ball Bearings, Double Direction, Super-Precision; Solid Block/Spherical Roller Bearing Housed Units-Eccentric Piloted Flange Cartridge; Spherical Roller Thrust Bearings; Super-Precision Cylindrical Roller Bearings; Support Rollers With Flange Rings With An Inner Ring; Tapered Roller Bearings/TS (Tapered Single) Imperial; Thrust Cylindrical Roller Bearings-Thrust Washer; Thrust Needle Roller Bearings-Thrust Washer; Thrust Spherical Roller Bearings-Type TSR; Track Rollers,Cam Followers; Type E Tapered Roller Bearing Housed Units-Piloted Bearing; Type E Tapered Roller Bearing Housed Units-Take Up: Top Angle Bearing (E-TTU); Type E Tapered Roller Bearing Housed Units-Take Up: Wide Slot Bearing; Wide Section Ball Bearings (62000, 63000); Timken 09196 Bearing; 6207 Bearing Timken; Timken 30203 Bearing; 469 Bearing