MSD MANUFACTURING CO.,LTD.

Support Rollers With Flange Rings With An Inner Ring

Support Rollers without flange rings are designed for applications where associated components limit axial movement of the outer ring. Based on needle roller bearings, these support rollers are available with or without an inner ring. Support rollers with an inner ring have an inner ring that is slightly wider than the outer ring to avoid axial clamping of the outer ring. Support rollers without an inner ring are intended for arrangements where the pin or shaft is hardened and ground.

Support rollers (yoke-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.. They are based on needle or cylindrical roller bearings. SKF supplies them ready-to-mount. They are available in several designs and variants:

40 mm x 90 mm x 32 mm skf PWTR 4090.2RS Support rollers with flange rings with an inner ring: Bolt (G) : M8; Bearing number : UCFB206-20

50 mm x 90 mm x 32 mm skf NUTR 50 A Support rollers with flange rings with an inner ring: Outer Diameter (mm) : 45,5; F : 27,5 mm

25 mm x 52 mm x 25 mm skf NATV 25 PPXA Support rollers with flange rings with an inner ring: B : 30,302 mm; D : 93,264 mm

6 mm x 19 mm x 12 mm skf NATR 6 X Support rollers with flange rings with an inner ring: Size (mm) : 6 mm x 19 mm x 12 mm; Width (mm) : 218

20 mm x 47 mm x 25 mm skf NUTR 20 X Support rollers with flange rings with an inner ring: Brand : CX; Bearing number : CX314

30 mm x 62 mm x 29 mm skf NATV 30 PPXA Support rollers with flange rings with an inner ring: bearing material: : High Carbon Chrome S; UNSPSC : 31171504

50 mm x 90 mm x 32 mm skf NUTR 50 X Support rollers with flange rings with an inner ring: ra max. : 1 mm; Calculation factor fHC : 1

20 mm x 47 mm x 25 mm skf PWTR 20.2RS Support rollers with flange rings with an inner ring: J : 128 mm; ra1 max. : 1 mm

17 mm x 47 mm x 21 mm skf NUTR 1747 X Support rollers with flange rings with an inner ring: Bore Diameter (mm) : 200; D : 310 mm

15 mm x 42 mm x 19 mm skf NUTR 1542 A Support rollers with flange rings with an inner ring: C : 20 mm; Outer Diameter (mm) : 200

12 mm x 32 mm x 15 mm skf NATR 12 X Support rollers with flange rings with an inner ring: Bore Diameter (mm) : 65,000; Outer Diameter (mm) : 120,000

30 mm x 62 mm x 29 mm skf NATV 30 Support rollers with flange rings with an inner ring: Hexagonal key size for grub screw N : 5 mm; Mass bearing unit : 2.6 kg

◂ Previous page Next page ▸

All Products Contact Now

Product Categories: Angular Contact Thrust Ball Bearings, Double Direction, Super-Precision; Solid Block/Spherical Roller Bearing Housed Units-Eccentric Piloted Flange Cartridge; Spherical Roller Thrust Bearings; Super-Precision Cylindrical Roller Bearings; Support Rollers With Flange Rings With An Inner Ring; Tapered Roller Bearings/TS (Tapered Single) Imperial; Thrust Cylindrical Roller Bearings-Thrust Washer; Thrust Needle Roller Bearings-Thrust Washer; Thrust Spherical Roller Bearings-Type TSR; Track Rollers,Cam Followers; Type E Tapered Roller Bearing Housed Units-Piloted Bearing; Type E Tapered Roller Bearing Housed Units-Take Up: Top Angle Bearing (E-TTU); Type E Tapered Roller Bearing Housed Units-Take Up: Wide Slot Bearing; Wide Section Ball Bearings (62000, 63000); Timken 09196 Bearing; 6207 Bearing Timken; Timken 30203 Bearing; 469 Bearing