Spherical Roller Thrust Bearings
A spherical roller thrust bearing is a rolling-element bearing of thrust type that permits rotation with low friction, and permits angular misalignment. The bearing is designed to take radial loads, and heavy axial loads in one direction. Typically these bearings support a rotating shaft in the bore of the shaft washer that may be misaligned in respect to the housing washer. The misalignment is possible due to the spherical internal shape of the house washer.
Spherical roller thrust bearings consist of a shaft washer (for radial bearings often called "inner ring"), a housing washer (for radial bearings often called "outer ring"), asymmetrical rollers and a cage.There are also bearing units available that can take axial loads in two directions.
Bearing rings and rolling elements can be made of a number of different materials, but the most common is "chrome steel", a material with approximately 1.5% chrome content. Such "chrome steel" has been standardized by a number of authorities, and there are therefore a number of similar materials, such as: AISI 52100 (USA), 100CR6 (Germany), SUJ2 (Japan) and GCR15 (China)
- 220 mm x 420 mm x 77 mm skf 29444 E Spherical roller thrust bearings
- 8483.20.40.80
- Cast Steel
- 420 mm x 730 mm x 70 mm skf 29484 EM Spherical roller thrust bearings
- Standard
- 8482.20.00.00
- 850 mm x 1440 mm x 142 mm skf 294/850 EF Spherical roller thrust bearings
- GENERAL BEARING
- 8482.10.50.68
- 180 mm x 300 mm x 46 mm skf 29336 E Spherical roller thrust bearings
- 2.677 Inch | 68 Mill
- Deep Groove
- 160 mm x 270 mm x 42 mm skf 29332 E Spherical roller thrust bearings
- AMI BEARINGS
- Mounted Units &
- 190 mm x 380 mm x 73 mm skf 29438 E Spherical roller thrust bearings
- Non-expansion
- 104026
- 500 mm x 670 mm x 62,5 mm skf 292/500 Spherical roller thrust bearings
- SCHAEFFLER GROUP
- 0.0